Grease stains can be extremely frustrating. They can damage clothes, car seats, upholstery, and carpets. They can damage the look of your house with those unappealing patches. In addition to that, grease stains can harbor a lot of harmful bacteria into your house since they tend to stick and seep in.
As a homeowner, you probably know that grease stains can be difficult to tackle. It does not matter if it is dry or fresh. That is why we are here to help. Today, we are going to share with you some tips on how to remove grease stains from your carpet. Don’t forget to hire carpet cleaning services Seattle if you need help.
Things You’ll Need
- Diluted ammonia solution
- Soft scrubbing brush
- Clean cloth for rinsing and drying
- Talcum powder or baking soda
- Dish soap
- Absorbent paper or kitchen roll
Getting Rid of Fresh Grease Stains
You should immediately get a lot of paper towels if you’re lucky enough to catch the stain on time. Next, blot up the grease as much as possible. However, you should not rub it. Let the paper towels rest for a couple of minutes. Next, liberally sprinkle talcum powder or baking soda over the area. Leave the powder for a couple of hours.
Finally, vacuum up your carpet. You should get your dish soap if you still notice traces of the stain. Apply several drops of dish soap onto the area and blot it using a damp cloth. Next, use clean water to rinse out the stain. Finally, use an absorbent towel to blot the area dry.
Getting Rid of Dried Grease Stains
If grease stains are ignored, they can dry up and become stubborn. Grease stains typically go unnoticed if you have children who are adventurous and playful. While it can be difficult to get rid of dried grease stains from the carpet, you should not worry. There are still ways to get rid of it.
- First, you should get your hot and soapy water and your kitchen roll.
- Use the water to dampen the stain. Use dry, absorbent towels to lift as much of the stain as possible.
- Once you are done, get the baking soda. Liberally sprinkle the baking soda over the stain and let it rest for a couple of hours.
- Then, vacuum up the baking soda.
- Next, get another hot and soap water and dampen the stain again. Use a clean towel to blot away the moisture. Let it dry.
- There should only be small traces of grease stain at this stage. The next thing you need to do is to get your ammonia solution.
- Professionals suggest combining ¼ cup of warm water with 1 teaspoon of household ammonia.
- Next, pour a little amount of the solution into the area. Then, blot it gently using a cloth. You should not soak the area if your carpet is not water-resistant.
- Next, get your scrubbing brush and start using it on the stain. Make sure you use small amounts of pressure. If you use it harshly, you can damage your carpet.
- Once you are done, the stain should be gone. The final thing to do is to get a bowl of clean water and rinse the area properly using a clean cloth.